Close Menu
    Technology

    How to Recover Data from Dead M.2 SSD

    JohnBy No Comments5 Mins Read

    What is M.2 SSD?

    M.2 SSD (Solid State Drive) storage components are extensively used in modern PCs, notebooks, and other electronic devices. Its form factor makes it possible to create small and effective designs, which makes it ideal for thin and light gadgets. M.2 SSDs connect to the motherboard through an M.2 slot without the usage of wires and store data in NAND flash memory.

    Sometimes M.2 SSD becomes dead due to some damage in SSD. In this article, you will learn about the reason behind Dead M.2 SSD, and different methods that you can adapt to recover your data from SSD. Even after following all, those methods if you are still not able to recover data from dead M.2 SSD then take professional SSD data recovery services.

    Reasons Why M.2 SSD Becomes Dead:

    M.2 SSDs can malfunction or go “dead” for a number of reasons. The following are some typical causes of M.2 SSD failure:

    1. Physical Damage: The M.2 SSD’s fragile components might be harmed by physical shocks, impacts, or improper handling, leaving it useless.
    2. Electrical Problems: The M.2 SSD’s circuitry can be harmed by power surges, electrical spikes, or a bad power source, rendering it unresponsive.
    3. Excessive Heat: A M.2 SSD’s performance and longevity might be negatively impacted by high temperatures and failure can result from extended heat exposure.
    4. Write Endurance: M.2 SSDs have a finite number of write cycles before they degrade, much like all NAND-based SSDs. This quality is referred to as “write endurance.” With extensive and intensive use, an M.2 SSD might reach its maximum write cycles and fail.
    5. Firmware or Software Issues: Corrupt firmware or software bugs can cause the M.2 SSD to malfunction or become unresponsive.

    Recovering Data from a Dead M.2 SSD:

    Data recovery from a dead or failed M.2 SSD can be difficult, and success is not always guaranteed.

    1. Make sure the M.2 SSD is properly connected to the motherboard by checking the connectors first. Occasionally, problems with detection can be brought on by poor connectivity.
    2. If the SSD is not being recognized by your present system, connect it to a different computer and try a fresh approach. This will demonstrate whether the SSD, machine hardware, or software is the problem.
    3. Try utilizing data recovery software, If the SSD is discovered but isn’t accessible. Then take some professional data recovery Software that can recover data from dead M.2 SSD.
    4. Speak with a data recovery service: If the SSD contains important data that cannot be restored using software, you should seek the assistance of a reputable data recovery center such as Stellar Data Recovery Service as this can recover data from dead M.2 SSD. They are also present in 14 Branches within India, and you can take data recovery services from Kolkata, Kochi, Hyderabad, Gurgaon, Noida, Chandigarh, Delhi, Chennai, Coimbatore, Bangalore, Mumbai, Vashi, Pune, and Ahmedabad.

    Keep in mind that it’s not always possible to recover data from a dead SSD, and using DIY recovery techniques may result in more damage. It’s necessary to balance the significance of the data against the dangers of attempted recovery, and if the data is essential, think about getting professional assistance. Regular backups are also usually advised to prevent data loss in the event of device breakdown.

    Preventive Tips to Avoid M.2 SSD Failure:

    1. Proper handling and installation: Handle the M.2 SSD gently and prevent dropping it or using too much force when installing it. Use the proper tools and according to the manufacturer’s instructions when installing or removing the SSD.
    2. Temperature and ventilation: Make sure the M.2 SSD is not exposed to excessive temperatures and is kept in a well-ventilated environment. Its performance and lifespan may be significantly impacted by overheating.
    3. Power supply stability: To prevent abrupt power surges or fluctuations that could harm the SSD, use a steady and dependable power source.
    4. Firmware updates: Consistently check the manufacturer for firmware updates and install them in accordance with instructions. Bug fixes and performance enhancements are frequently included in firmware updates.
    5. Try to minimize needless write-heavy tasks that could wear out the SSD over time. M.2 SSDs are resilient, but avoid write-heavy tasks at all costs. Avoid using them, for instance, as a scratch disc for video editing.
    6. Use TRIM: Ensure that TRIM is turned on in your operating system if it supports it as it effectively manages data storage, preserving SSD performance and longevity.
    7. Periodically backup your data: You should periodically backup your data to a cloud-based service or an external storage device. This guarantees that you will still have a copy of your crucial data even if the SSD malfunctions.

    Recall that data recovery from a dead SSD is not always possible, especially in situations where there has been significant physical damage. To choose the best line of action, it is crucial to carefully assess the circumstance and confer with the data recovery service. Additionally, avoiding potential problems like SSD failure and data loss by using preventative measures can help.